| Customization: | Available |
|---|---|
| Customized: | Non-Customized |
| Certification: | ISO, IATF16949 |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
corrosion resistant AISI 316 stainless steel ball 7.938mm G100 for pump
| Product | corrosion resistant AISI 316 stainless steel ball 7.938mm G100 for pump |
| Material | Stainless Steel 316 |
| Grade | G100 |
| Surface | Zero defect,clear |
| size | 7.938mm |
| Sample | Free sample |
| Application | photographic devices, medical instruments, quick couplings, recirculating balls, ink cartridges, jewels,Special bearings, pumps and valves, aerosol and dispenser sprayers. Utilised in the foodstuff, paper, chemical, rubber, textile industry |
| characteristic | Austenitic stainless steel balls with higher corrosion resistance than AISI 304 balls. They show good toughness. AISI 316L has a lower carbon content (maximum 0,030%). Balls are provided in the passivated condition. |
| corrosion resistance | Very good corrosion resistance with respect to organic substances, good resistance to several strong acids (acetic, phosphoric, sulphuric acid) and on sea water. They are subjected to pitting and crevice corrosion in presence of hot chloride solutions and to stress corrosion when temperature exceeds 60°C. They do not resist in contact with hydrochloric and hydrofluoric acids, aqua regia, iron and magnesium chlorides. |
| Certification | ISO 9001, IATF16949, ROHS, REACH |
| Packing | boxes,carton,wood pallet |
Material
| AISI 316 & 316L Stainless Steel | |||||||||
| Materials Standard | Chemmical Composition (%) | Hardness (HRC measured on parallel flats) | |||||||
| C | SI | Mn | P | S | Ni | Cr | Mo | ||
| AISI 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 12-15 | 16-18 | 2.0-3.0 | HRC≤26 |
| AISI 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 10-14 | 16-18 | 2.0-3.0 | |
| Size:2.381-12.7mm Precision Grade: G100-G1000 | |||||||||
Ball Diameters
Precision Grade
Quality Assurance
Before packing, steel balls are sent for final audit to check for surface roughness, roundness, waviness, lot size variation and hardness in a sophisticated laboratory, according to specified control plans and dock audit procedures. Once all requirements are met, a test certificate is then prepared for the customer. Our sophisticated laboratory is equipped with high precision, worldwide respected machines and equipment and is managed by properly trained and qualified personnel.
We are manufacturer of steel balls for more than 25 years experience. Mass production and professional staff & Advanced equipment ensure our steel balls competitiveness.
We consider every business serious; we consider every customer as our VIP; Quality is our culture.
){kind=link}